en-us_main.book.book Page 13 Tuesday, October 17, 2023 1:22 PM
-
Dimension/Clearance
H
Distance from side edge of cutout to side of counter
I
Distance from edge of cooktop to nearest
combustible wall (either side of unit)
J
Height below cutout
(Empty space is needed underneath the cooktop for
installation purposes.)
K
Distance from front of counter to front edge of cutout
L
Junction box (approximate location)
M
Junction box (approximate location)
N
Depth of overhead cabinets
O
Depth of bottom cabinets
P
Clearance from top of cooking surface to bottom of
overhead cabinets
Q
Distance between rear edge of cutout and nearest
combustible surface.
R
Clearance from countertop to bottom of adjacent
cabinets
All dimensions are stated in inches and millimeters (mm).
Allow 2" (50 mm) below the armored cable opening to clear the electric cable and allow space for
installation of the junction box on the wall at the back of the cooktop.
CAUTION
• To eliminate the risk of burns or fire by reaching over heated surfaces, cabinet storage space located
above the cooktop should be avoided. If cabinet storage is provided, risk can be reduced by installing a
range hood that projects horizontally a minimum of 5" (127mm) beyond the face of the cabinets.
• It is very important to keep 2 3/4" (70 mm) distance between the cooktop and an oven installed below it.
Installing the Cooktop
Electrical Connections
Important Safety Instructions
• Be sure the cooktop is installed and grounded
properly by a qualified installer or service
technician.
LCE3010SBE
13/16" (20 mm)
3 3/4" (95 mm)
2
2
5 23/32" (145 mm)
2 1/2" (64 mm)
10" (254 mm)
12" (305 mm)
13" (330 mm)
1
24" (610mm)
2
30" (762 mm)
2
36" (914 mm)
18" (457 mm)
2
• This cooktop must be electrically grounded in
accordance with local codes or, in their absence,
with the National Electrical Code ANSI/NFPA No.
70, latest edition in the United States.
INSTALLATION
13
LCE3610SBE