Publicidad
Idiomas disponibles
Idiomas disponibles
en-us_main.book.book Page 20 Tuesday, October 17, 2023 1:22 PM
20 OPERATION
Control Panel
Control Panel Features
Locations of Surface Elements and Controls
The surface burner elements are positioned in the same locations on the cooktop and the control panel for
ease of use.
LCE3010SBE
WARM: Lowers the selected active element to the lowest setting.
a
Hot surface indicator: The indicator light below HOT will illuminate when the cooking area is hot.
b
It will remain on, even after the control is turned off, until the area has cooled.
CHILD LOCK: Press and hold for 3 seconds to activate and deactivate the Child Lock function.
c
WARM: Indicates that a surface burner has been set to Warm.
d
Single element, left front element
e
POWER ON/OFF: Press POWER ON/OFF to turn the entire cooktop ON and OFF. When it is ON,
f
the cooktop is in standby mode until an element is activated. Set the power level for an element
by selecting a number from 1 to 9 in the element power settings.
Dual element, right front element
g
Dual element indicator
h
Warming zone
i
Single element, center rear element
j
Single element, left rear element
k
-
l
Before Using the Cooktop
Before using the cooktop for the first time, clean it
thoroughly with the included cleaner or ceramic
cooktop cleaner according to the Care and
LCE3010SBE
Cleaning instructions in this guide. This will help
protect the ceramic surface and make future
cleanup easier.
LCE3610SBE
LCE3610SBE
Triple element, center rear element
Dual element, left rear element
Triple element indicator
Publicidad
