Publicidad
Idiomas disponibles
Idiomas disponibles
Page 10
Retrofit Installation
11
Install Knockout Plate, Connect Wires and Install Wiring Panel
• Use proper UL-approved connectors to secure wiring to the Knockout Plate provided in Parts Bag.
• Connect wires as shown in wiring diagram.
• Do not use a dimmer switch to operate the light.
2
Screw from
Parts Bag
Fan
• See OPERATION section on page 12 for
details.
• SENSOR/CONTROL switch allows humidity
control to be turned on for automatic
operation and off for fan cleaning and
maintenance purposes.
• Toggle mode can be used to manually turn
fan on.
• SENSOR/CONTROL switch may be located
where it is not easily accessed for everyday
usage; it may need to be labeled and located
where it can't be turned on without being
seen from fan to comply with local and
national codes.
Attach cable
1
clamps to
Knockout Plate.
Knockout Plate
mounts to inside of
Housing and may
be oriented
as desired.
3
Connect wires
120 VAC
Light
LINE IN
CONTROL
Screw set
aside in
Step 6
5
GRD
WHT
BLK
STANDARD OR
MULTI-FUNCTION
WALL SWITCHES
SENSOR /
LIGHT
CONTROL
BLACK
WHITE
ORANGE
SENSOR /
NIGHT
LIGHT
LIGHT
STANDARD OR
MULTI-FUNCTION
WALL CONTROLS
(purchase separately)
XN110HL Installation Guide
4
GRD
WHT
BLK
RED
14/3
NIGHT
LIGHT
14/2
BLK
WHT
RED
GROUND
(green or bare)
BLUE
LIGHT RECEPTACLE WIRES
BROWN
SWITCH
BOX
KNOCKOUT
PLATE
120 VAC
LINE IN
6
WHT
BLU
LIGHT
RED
NIGHT
LIGHT
RED
FAN
BLK
ORG
SENSOR/
CONTROL
BRN
WHT
RECEPTACLES
FAN RECEPTACLE
WIRES
Publicidad
