HumanTechnik earisMAX Instrucciones De Servicio página 14

Charging earisMAX
You can check the battery status in the earisMAX app.
earisMAX offers two charging options:
USB-C
Connect the USB-C port (6) to the included USB-C cable with a USB charger. During
charging, the Charging Status LED (7) next to the port will light up red. When the
LED is off, the headphones are fully charged.
Wireless Charging
earisMAX can be wirelessly charged using the optional earis MAX Charging Station
via induction. The charging status will be displayed on the charging station.
Technical Specifications
Frequency Range:
Max. Sound Pressure Level (at 1 kHz):
Acoustic THD (at 1kHz):
RF Transmission Frequency Range:
Transmission Power in mW/dBm:
Operating Time per Battery Charge:
Rechargeable battery capacity:
Charging Time:
Operating Temperature:
Weight:
These devices comply to the requirements of the following EC directives:
- 2011/ 65/EU + 2015/863/EU RoHS-directive
- 2012/19/EU WEEE-directive
- 2014/53/EU RED-directive
Conformity with the above-mentioned directives is confirmed by the CE mark on the
device. CE declarations of conformity are available on the Internet at www.human-
technik.com/service
Technical changes reserved.
14 Français
20Hz - 20kHz
123dB
<0.5%
2,40 – 2,4835 GHz
< 10 mW/< 10 dBm
approximately 80 hours
720mAh
approximately 2 hours via USB-C
0°C to 40°C
250g