Skymsen CSE Manual De Instrucciones página 3

Children shall be watched in order to avoid them to
play with the equipment.
In case of emergency, unplug the equipment.
Never spray water directly on the equipment.
2. COMPONENTS AND TECHNICAL CHARACTERISTICS
01
02
03
04
05
12
06
07
01– Feeding Throat
02 – Liquid Chamber Lid
03 – Fast Lock
04 – Outlet tube
05 – Motor Housing
06 – ON Switch and OFF
Switch
07 – Base
13
09
10
11
08– Waste Exit Opening
09 - Sieve
10 – Lid Sensor
11 – Liquid Chamber
12 - Cup
13- Stumper
14– Collector Bowl
CHARACTERISTICS
Rotation
Voltage
Frequency
Power rating
Height
Width
Depth
Net Weight
Gross Weight
3. INSTALLATION E PRE OPERATION
08
3.1 Positioning
14
Place the equipment on a dry, stable and level surface having
a preferential 850 mm height above the floor.
3.2 Electrical Installation
Before plugging the equipment on the socket, make sure the
network voltage is the same as indicated on the cord label.
The power plug has 3 (three) pins, the middle one is
designed to grounding – Ground Pin.
All the 3 (three) pins must be properly connected before
operating the equipment.
Make sure the network voltage where the equipment
is going to be installed is the same as indicated on the
cord label.
TABLE 01
UNIT CSE
rpm 3500
V 110 ou 220
Hz 60
W 660
mm 570
mm 600
mm 350
kg 13,7
kg 20
850 mm
3