neno Bianco Manual De Instrucciones página 15

milk-out mode after 2 minutes.
C. Changing the suction level - Press „+" (3) to increase the suction or „-" (4) to
decrease the suction. Stimulation mode (5): levels L1-L9; Extraction mode
(6): levels L1-L9; Milk delivery mode (7): levels L1-L9.
D. Battery status (8) - The battery icon shows the battery charge status. Connect
the device to charge when the battery is close to empty.
E. Device operating time (9) - the indicator shows how many minutes have
passed since the breast pump was switched on. The device automatically
switches off after 30 minutes.
F. Suction level (10) - Shows the currently selected suction power level.
04. BEFORE FIRST USE
Check that the kit is complete before starting work.
1. Connect the breast pump to the power supply. Charge the device battery
for 2 hours.
2. Disconnect any parts of the breast pump that come into direct contact with
the breast or milk (FIG. C)
3. Unscrew the milk bottle from the joint.
4. Pull the valve down to disconnect it from the joint.
5. Remove the lid from the funnel and pull the funnel off the joint.
6. Remove the cover and membrane from the joint.
7. Clean the machine components (refer to the CLEANING AND DISINFECTING
section).
05. CLEANING AND DISINFECTION
Washing and disinfecting are two different operations. They must be done separa-
tely to protect your baby and to ensure the correct operation of the breast pump.
Washing - washing the surface of the unit and removing dirt.
Disinfection - killing organisms such as bacteria or viruses that may be present on
the surface of the equipment.
Funnel and funnel lid, breast pump parts (joint, gasket, gasket cover), bottle
and teat:
Wash and disinfect before first use.
Wash after each use.
Disinfection once a day.
NOTE:
- Separate and wash all machine parts that come into contact with milk immedia-
tely after using the machine. This will remove any milk residue and prevent the
growth of bacteria.
- Use only drinkable tap water for washing. Use bottled water if the water in your
tap does not meet this requirement.
- When cleaning the valves, do not use brushes. Be careful not to puncture the
15