neno Bianco Manual De Instrucciones página 19

damage, the device goes into storage mode after a long period of inactivity.
To deactivate the storage mode, connect the device to power and charge it
for 2 hours. Before you put the breast pump away for an extended period of
time, make sure that:
a. All parts of the breast pump are clean.
b. You have cleaned the pumping device.
c. The device battery is fully charged.
12. FAQ
1. The device does not start: make sure that the breast pump is plugged into a
working electrical outlet. If the breast pump has no power source, its display
will not turn on and no error message will appear.
2. The device does not pump when switched on: make sure the device has a
charged battery or is connected to the power supply.
3. No/poor suction: Make sure all parts of the breast pump are correctly
positioned. Take the breast pump apart and make sure all parts are clean
and undamaged. Reassemble the breast pump according to the instructions
in the
instructions in the Lactator Assembly section. When pumping, make sure the
entire surface of the funnel is pressed against the breast.
4. More milk has come out of your breast than the bottle can hold: turn off
the pump and unplug it. Use a moist (not wet) cloth to wipe the breast
pump. Wash the parts of the breast pump that contain milk according to the
instructions in the CLEANING AND DISINFECTING section. When all parts of
the machine are dry, reassemble.
13. SPECIFICATION
Battery: lithium-ion 3.7V 2000 mAh
Operating time: up to 120 minutes
Charging time: approximately 2 hours
Input power: 5V 2A
Charging cable: USB C
Pump dimensions: 115x115x55 mm
Weight of pump: 284 g
Suction power: single mode: 11~56; dual mode: 6~45 kPi
14. WARRANTY/CLAIMS CARD
The product is covered by a 24-month warranty.
at: https://neno.pl/gwarancja
Details, contact and service address can be found at: https://neno.pl/kontakt
Specifications and contents are subject to change without notice. We apologise for
any inconvenience.
Warranty conditions can be found
19