Publicidad
Idiomas disponibles
Idiomas disponibles
Pre-Installation (continued)
ALTERNATE SETUP
This unit can also be assembled as two separate 39 in. high units. One unit will have three shelves and the other will have two shelves. If
choosing this option, follow assembly steps 2, 3, 4, 5 and 6 until all shelf levels are completed for both units.
NOTE: Post Coupler (F), Post Foot (G) and Post Cap (H)
are not used for this setup.
Assembly
1
ASSEMBLE POST FEET TO POSTS
□
IMPORTANT: Posts must be oriented with the narrow
□
end of the post slots facing down as shown.
□ Assemble Post Foot G (x4) to the bottom of A (x4), making sure the post are oriented with the narrow ends of the slots facing
down.
A
G
G
G
G
A
G
Narrow end of post slots face down.
4
✓
Publicidad
