Husky N3R482478W5R Guía De Uso Y Cuidados página 5

Assembly (continued)
2
ASSEMBLE BRACES TO POSTS
□ Assemble Brace B (x2) to the pair of posts, making sure the post feet are at the bottom and the narrow end of the post slots are
facing down.
A
B
A
Recessed ledge
B
Inside View
B
Inside View
B
Please contact [Brand Specific Phone Number/must match cover] for further assistance.
IMPORTANT: Make sure each pair of braces (B) are installed at the same
height on each set of posts (A). Do this by simply counting the number of
slots that the first brace is installed at, then install the second brace at the
same slot count on the opposite two posts. (This will continue for each
round of shelf level installations).
NOTE: Insert the tab from both ends of the brace through the slot on each set of post.
The recessed ledge of the brace must face up.
Helpful Tip: For stability lean the posts against the wall during assembly if installing
alone.
NOTE: Once installed, press firmly down on the brace to make sure the tab is fitted
properly into the post slot on both sides. Use a rubber mallet to tap down lightly on
both ends of the brace to help seat the tabs into the post slots. DO NOT use force with
the rubber mallet, only a light tap is necessary.
5
✓
Please contact 773-475-3131 for further assistance.
BRAND SPECIFIC URL
HUSKY