Descargar Imprimir esta página

LIVARNO home 373575 2104 Instrucciones De Montaje página 7

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 15
GB/IE
GB
IE
STORAGE CABINET
Assembly manual
Quick-Start-Guide
This document is an abridged print ver-
sion of the complete operating instruc-
tions. With this QR code, you can di-
rectly reach the Lidl Service website
(www.lidl-service.com) and can open
your operating instructions be entering
the
article
number
373575_2104.
WARNING! Observe the complete operating in-
structions and the safety instructions to avoid person-
al injury and damage to property. The Quick Start
Guide is part of this product. Familiarise yourself with
all of the operating and safety information before us-
ing the product. Keep the Quick Start Guide in a safe
place and hand over all documents when passing
the product on to third parties.
Hereinafter, the Storage Cabinet will be referred to
as product.
Safety
Intended use
The product is not intended for commercial use. Dif-
ferent use or a modification to the product are not
deemed as intended use and may lead to risks, such
as injuries and damage. The distributor assumes no
liability for damage that results from improper use.
The product is exclusively suitable for interior
use.
Scope of delivery (Fig. A)
1 x cover panel
1
2 x side part
/
2
4
1 x bar drawer element
3
1 x base plate drawer unit
5
1 x middle part
6
2 x shelves
7
2 x door
/
8
9
1 x base plate
10
2 x base frame
11
2 x base frame connector
12
1 x rear wall
13
2 x rear wall
14
2 x drawer front
15
2 x drawer side panel left
16
2 x drawers side panel right
17
12
2 x drawers rear side
18
2 x drawer bottom
19
20 x connecting bolt
A
12 x cam screw metal
B
20 x wooden dowels
C
8 x cam screw plastic
D
8 x wood screw 4 x 30 mm
E
4 x door handle
F
4 x flat head threaded screw 4 x 18 mm
8 x wood screw 5 x 45 mm
H
4 x pull-out rail
I
24 x wood screw 3.5 x 12 mm
J
(IAN)
12 x mounting bracket
K
16 x wood screw 3 x 14 mm
L
2 x magnet
M
4 x hinges
N
24 x wood screw 4 x 14 mm
O
14 x threaded screw 6 x 30 mm
P
1 x allen key 4 mm
Q
8 x pins
R
2 x oval head screw 4 x 12 mm
S
2 x mounting bracket
T
2 x wood screw 4 x 35 mm
U
2 x dowel Ø 6 mm
V
2 x metal plate
W
4 x wood screw 3 x 12 mm
X
1 x assembly instructions (without illus.)
Technical specifications
Type: Storage Cabinet
IAN: 373575_2104
Tradix Item No.: 373575-21-A
Measurements: approx. 85 x 35 x 90 cm (W x D
x H)
Weight: approx. 29,5 kg
Material: wood, metal
Production date: 09/2021
Warranty: 3 years
5. Safety information
WARNING!
!
Risk of injury and suffocation!
If children play with the product
or the packaging, they may injure
themselves or suffocate!
-
Do not let children play with the product or the
packaging.
-
Supervise children who are close to the product.
WARNING!
!
Risk of injury!
A defective product is not allowed to be
used! There is a risk of injury!
-
Do not use the product in the case of malfunc-
tions, damage or defects.
-
Significant danger can occur for the user in the
case of improper repairs.
WARNING!
!
G
Fatal danger!
Do not drill without checking the
intended positions for electrical, gas
or water lines first! There is a risk of
fatal injuries!
-
Damage to electrical, gas or water lines can
cause dangerous situations! Use appropriate
detectors to determine whether hidden lines are
situated in the work area.
kan
WARNING!
!
Risk of injury!
Secure the product against falling over!
There is a risk of injury!
-
It is absolutely necessary to fix the product to a
wall using the supplied mounting brackets
product could fall over and, for example, injure
children.
-
Place the product on a level surface.
Assembly
1. Remove all packaging materials.
2. Check whether all parts are available and un-
damaged, see Fig. A.
If this is not the case, notify the specified service
address.
For assembly, you will need a Phillips screwdriver
(not in the scope of supply) and an Allen key
(included in the scope of supply).
-
Mount the product as shown in Fig. B to Fig. P.
Fixing the product to the wall
WARNING!
!
Risk of injury!
Check the suitability of the wall in advance
to ensure that the fastening devices can
withstand the generated forces. There is a
risk of injury!
NOTE!
To fix the product to a wall, you need a drill with a
6 mm drill bit, a Phillips screwdriver and a hammer.
-
Fix the product as shown in Fig. N.
CAUTION!
!
Risk of injury!
There is a risk of injury due to the
weight.
>30KG
- If you intend to move the product, lift it with
two people.
-
Avoid pushing the product over the floor. The
floor could become scratched.
CAUTION!
!
Risk of injury!
There is a risk of injury due to tumbling or falling.
- The product is not a climbing aid.
- Never stand or sit
on the product.
CAUTION!
!
Danger of property damage!
The product is not allowed to be
overloaded.
. The
max.
T
kg
- Only load the product up to the max.
weight specification, see Fig. Q.
Cleaning and care instructions
7.
NOTE!
Danger of material damage!
-
only clean with a damp cloth
-
only use a a mild detergent
-
do not use any strong detergents and/or chemi-
cals
-
do not use sharp-edged tools such as spatulas or
Q
similar, they can damage the surface
Disposal
Disposal of the packaging
The packaging and operating in-
structions are made of 100 % en-
vironmentally friendly materials,
04
which you may dispose of at lo-
LDPE
cal recycling centres.
Disposal of the product
The product may not be disposed of with normal
household waste. Please find out about disposal
options for the product from your local authority or
town administration.
GB/IE
13

Publicidad

loading