Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
Instructions
INSTALLING THE REFRIGERATOR
{cont.}
_-I REMOVE THE FRESH FOOD
DOOR HANDLE
(For placement
in the installation
location
or reversal of the handles - on some
models}
Stainless
steel
(on
some
models}:
0
REMOVING
THE DOOR
HANDLE: Loosen
the set screws
with the 3/32"
Allen wrench
and remove
the handle.
NOTE: For
Double Door
models follow
the same
procedure
on
the opposite door.
Badge
Mounting
Fasteners
(appearance mag varg)
Plastic
handle
(on some
models):
O REMOVING THE DOOR HANDLE: Depress the
tab on the underside of the handle and slide
the handle up and off of the mounting
fasteners.
0
REVERSING THE
DOOR HANDLE
(on some
models):
• Remove
the handle
mounting
fasteners with
a 3/16" Allen
wrench and
transfer
the handle
mounting
fasteners to
the right side.
(appearance mag varg)
o
o
Remove the logo badge.
Remove and transfer
the plug button to
the left side of the fresh food door. NOTE:
Use a flat plastic edge to prevent damaging
the door. Remove any adhesive on the door
with a mild detergent.
Remove the paper
covering on the adhesive backing on
the logo badge prior to carefullg attaching
the badge to the door.
18
m REMOVE THE FREEZER DOOR HANDLE
Stainless
steel
and plastic
handles:
O Loosen
the set screws
located
on the
underside
of the handle
with the 1/8" Allen
wrench and remove the handle.
NOTE: If the handle mounting
fasteners need
to be tightened
or removed, use a 3/16" Allen
wrench.
Publicidad
