Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
Instructions
REPLACING THE FREEZER DRAWER (on some modeIsI
Two people mag be required
to complete
this procedure.
I_ ATTACH AND SECURE THE DRAWER
FRONT TO THE SLIDES
rA1 Pull out the rail assemblies to the full length
on each side of the cabinet.
i
/!
.!l
rB1 Locate the slots on the inside of the rail
assemblies
near the back.
Slot
........... - ... _. ! iJ
Rail assembly
rc]
Insert the hooks at the back of the drawer
railings into the slots on the rail assemblies.
r_
Lower the front of the drawer, making sure the
tabs on the sides of the railings fit into the front
slots in the rail assemblies.
r_ ATTACH AND SECURE THE DRAWER
FRONT TO THE SLIDES (cont.)
[]
Replace the screws on both rail assemblies.
\
Screw
[_] REPLACE THE FREEZER BASKET
Replace the lower freezer basket by lowering it
into the frame.
22
Publicidad
