Publicidad
Package Contents
(1) Tribute Foot
(1) Foot Shell
(1) CPI Sock
(1)Cosmetic Attachment Plate (regular toe only)
(1) TruLube Lubricant
This diagram is to help familiarize you with the unique parts of the Tribute. These parts are referenced in the instructions
and used when speaking with a technical service representative.
Key Components (Figure 1)
A.
B.
Endo Ankle Bone
E.
F.
Ankle Bushings (2)
• CPI Sock (not shown)
•
Foot Shell
PRODUCT DESCRIPTION
This prosthetic foot device is constructed with an endo ankle bone, composite foreheel, bumpers, bushings, axial
pin, and screw. The foreheel is secured to the ankle bone with the axial pin and screw.
INTENDED USE
The Tribute is a prosthetic foot designed to replace one or more functions of the biologic human foot.
INDICATIONS:
▪ Lower limb amputations
PROTECTIVE COVER ON DOME
Remove the protective cover on dome after alignment is completed and before patient leaves clinic.
TECHNICAL SPECIFICATIONS
FOOT SIZE
WEIGHT LIMIT
21-30 cm
220 lbs / 100 kg
*26cm foot w/shell
GAIT MATCHING
The gait match determines the firmness of the foot based on the user's specifications (foot size, patient weight,
and impact level).
FIRMNESS CATEGORIES
Refer to the chart below to determine the correct firmness category.
Note: Incorrect category selection may result in poor device function. Contact College Park Technical Service if
you have questions about category selection.
WEIGHT LBS
0-100
WEIGHT KG
0-45
SIZE CM
21-30
Low Impact
1
Moderate Impact
1
Foreheel Bone
Axial Pin Screw
Torque 4 N·m (36 in·lbs)
(not shown)
▪ None known
BUILD HEIGHT
2.4 in / 6.1 cm
GUIDELINES
®
101-120
121-140
46-54
55-63
1
2
2
2
Tools Recommended
(1) 4 mm Hex Key
(1) 6 mm Hex Key
C.
Bumpers (2)
G. Stride Control
®
CONTRAINDICATIONS:
FOOT WEIGHT*
529 g
141-160
161-180
64-72
73-81
2
3
2
3
(1) Foot Horn
(1) Pin Guide
D.
Axial Pin
Adjustment
181-200
201-220
82-91
92-100
3
4
4
4
EN
Publicidad
