SAFETY INFORMATION
Before installing your fireplace doors, be sure to read all safety and assembly information to ensure the proper
operation of the unit. If you have any questions regarding the proper use of this product, be sure to contact our
customer service department, whose contact information is found in our warranty.
WARNINGS
• DO NOT close the glass doors while a fire is burning in the fireplace. Even though the doors are made
of tempered glass, the glass can still shatter if exposed to excessive heat.
• DO NOT leave the screen doors open while the fire is burning. Be sure to leave the screen doors closed
while a fire is burning in the fireplace. This will prevent sparks from escaping from the fireplace.
• DO NOT allow any cold liquid or substance to come in contact with the glass doors while they are hot.
This could cause the glass to shatter.
• DO NOT build a fire that is too large or place the firewood grate too close to the screen doors to avoid
discoloration of the frame.
• DO adjust the damper found at the bottom front of the screen doors to allow for proper air flow into your fire.
WARNING: This product can expose you to chemicals, including lead and lead components which are
known to the State of California to cause cancer, birth defects, and other reproductive harm. Wash your hands
after handling this product. For more information go to www.P65Warnings.ca.gov.
FIREPLACE PRECAUTIONS
• Before operating a new fireplace, be sure to neutralize the fireplace by applying a diluted solution
of ammonia, followed by a warm then cold rinse.
• Never store combustible or volatile substances inside the fireplace.
• Keep all combustible and volatile substances away from the front of the fireplace.
• Do not use any combustible or volatile substances to help start a fire.
• Open the chimney damper before starting a fire.
• Keep children and pets away from the fireplace while in use.
• Do not touch any part of the glass door unit with your bare hands while a fire is burning.
Always use an insulated glove to open and close the doors and damper.
• Never use your fireplace as an incinerator.
• Always allow ashes to fully burn out and cool before disposing.
PREPARATION
Before beginning assembly of product, make sure all parts are present.
Compare parts with package contents list. If any part is missing or
damaged, do not attempt to assemble the product.
Package Removal: Carefully remove the glass door unit and all other
pieces from the box, placing the glass door unit face down on a soft
flat surface.
Tools Required for Assembly (not included): Flathead Screwdriver,
Phillips Head Screwdriver, Work Gloves, Measuring Tape, Scissors
INSTALLATION VIDEO
Scan QR code below
for assembly video.
4