Publicidad
Idiomas disponibles
Idiomas disponibles
B
Product usage
6.
To turn the heater off, turn the temperature dial anticlockwise as far as it can go (MIN
position) and turn the power dial to the off position (0). Unplug the unit from the mains
socket.
NOTE:
•
When turning the temperature dial up, the clicking sound indicates that the
thermostat is starting to work and the desired function is activated. Similarly,
when turning the temperature dial down, the click indicates that the thermostat
has turned off and the function is deactivated.
Heater safety features
•
The heater has a built-in overheating protection mechanism. A safety switch will cut off
the power if the heater overheats (e.g. the air inlets/outlets are totally or partially blocked).
Turn the power dial to the off position (0) and the temperature dial to the (MIN) position.
Unplug the plug from the mains socket. Wait 30 minutes for the heater to cool down.
•
Remove the source of overheating (e.g. a blockage in the vent holes/grilles or excessive
dust or dirt on the unit).
•
Turn the heater back on.
NOTE: If overheating continues or the unit repeatedly malfunctions, return the
heater to an approved service centre.
16
EN
Publicidad
