Publicidad
EN - Camera Installation
C221NA
Warning! Ensure the mounting surface supports
1.65 lbs (0.72 kg), 3× the camera's weight.
1.
Use the mounting template to mark
and drill holes for screws and the
camera's cable.
Note: To route cables along a wall,
use the camera's cable notch.
2.
Insert anchors for surfaces like
drywall, wood, brick, masonry, or
concrete.
3.
Guide the camera's cable through
the surface opening or cable notch.
4.
Connect one end of the BNC cable
to the camera's video output and
the other end to the DVR's video
input. Then, plug the camera's power
adapter into its port and connect
it to a power outlet to turn on the
camera.
10
Publicidad
