Publicidad
EN - Camera Installation
C221NC
Warning! Ensure the mounting surface supports
1.8 lbs (0.84 kg), 3× the camera's weight.
1.
Use the mounting template to mark
and drill holes for screws and the
camera's cable.
Note: To route cables along a wall,
use the camera's cable notch.
2.
Insert anchors for surfaces like
drywall, wood, brick, masonry, or
concrete.
3.
Use the T10 Torx Key to loosen the
adjustment screw and remove the
camera from the mounting bracket.
4.
Attach the mounting bracket to the
surface using the provided screws
and a screwdriver.
14
Publicidad
