NOTE
Do not use any chemical, alkaline, abrasive
u
or otherwise aggressive cleaning or
disinfecting agents to clean the product as
they may damage its surfaces .
Maintenance
Test interval
Procedure
Before each use
Check whether the
emergency off switch
and control switch
properly functioning .
Every 30 cycles* Check the entire
steel cable
(Fig . K) . Replace the
steel cable if damaged
(available at specialist
retailers) .
Every
Check to ensure the
100 cycles*
maximum/minimum length
levers
functional without load .
Every
Lubricate the steel cable
200 cycles*
and the pulley
Every
Make sure all screws are
800 cycles*
securely fastened .
Check the entire product for
signs of wear .
* One cycle corresponds to one upward and
downward movement of a load .
Repairs
There are no parts in the product interior that
can be repaired by the user . Contact a qualified
professional to have the product checked and
repaired .
[
7 ]
are
8 ]
[
for damages
14 ]
[
are fully
15 ]
[
[
16 ]
14 ]
[
.
[
11 ]
Storage
Clean the product as described above .
Store the product and its accessories in
a dark, dry, frost-free and well-ventilated
location .
Store the product at a location out of the
reach of children . The ideal temperature
for long-term storage is between +5 and
+30 °C .
Store the product in its original packaging .
Disposal
The packaging is made entirely of recyclable
materials, which you may dispose of at local
recycling facilities .
Observe the marking of the packaging
materials for waste separation, which
are marked with abbreviations (a)
and numbers (b) with following
meaning: 1–7: plastics/20–22: paper
and fibreboard/80–98: composite
materials .
The product and packaging materials are
recyclable and are subject to extended producer
responsibility .
Dispose them separately, following the illustrated
Info-tri (sorting information), for better waste
treatment .
The Triman logo is valid in France only .
Contact your local refuse disposal
authority for more details of how to
dispose of your worn-out product .
GB/IE
21