Publicidad
Idiomas disponibles
Idiomas disponibles
( 3 )
Energy Saver / Override (3 sec)
Touching this button turns Energy Saver
mode on and off.
When you turn Energy Saver on, the
Energy Saver icon lights.
Turn Energy Saver off and the icon goes
off.
The Energy Saver function automatically
turns on when power is supplied to the
refrigerator.
If condensation or water drops appear on
the doors, turn the Energy Saver mode off.
Override: Press the Energy Saver /
Override (3 sec) button for 3 seconds to
turn on the Override function.
When the Override function is on, the
refrigerator ignores the SMART GRID
(Demand Response) signal.
See page 27 for details.
( 4 )
Fridge / Power Cool (3sec)
The Fridge button serves two purposes:
- To set the Fridge to your desired
temperature.
- To turn the Power Cool function on
and off.
1. To set the Fridge temperature, press
the Fridge button.
You can set the temperature between
34 °F (1 °C ) and 44 °F (7 °C).
2. Power Cool function
Touch and hold this button for 3 seconds
to decrease the time needed to cool
products in the Refrigerator.
It can be helpful if you need to quickly cool
easily spoiled items or if the temperature in
the fridge has warmed dramatically.
(for example, if the door was left open)
DA68-02976A-10.indb 23
( 5 )
Alarm / °C↔°F (3sec)
The Alarm button serves two purposes:
- To turn the door open alarm on and off
- To switch the temperature units
between ºC and ºF.
1. Door Alarm Function
If the door alarm is set to On, an alarm
beeps if a refrigerator door is left open for
more than two minutes.
The beeping stops when you close the
door. The door alarm function is pre-set to
On in the factory.
You can turn it off by pressing and then
releasing the Alarm button.
You can turn it back on in the same
fashion.
The icon lights up when the function is on.
When the Door Alarm function is on and
the alarm sound is triggered, the Door
Alarm Icon will blink while the alarm
sounds.
2. To switch the temperature units
between ºC and ºF.
Touch and hold this button for 3 seconds
to select the temperature display you
want.
Each time you press and hold the button,
the ºC and ºF temperature modes
alternate and the ºC or ºF icon lights up,
indicating your selection.
English - 23
2018. 7. 9.
5:14
Publicidad
