Publicidad
Idiomas disponibles
Idiomas disponibles
- Failing to do so may result in an electric shock
or fire due to electric leakage.
• You need to remove all the protective plastic
film before you initially plug the product in.
• The refrigerator must be safely
grounded.
- Always make sure that you have grounded the
refrigerator before attempting to investigate or
repair any part of the appliance.
Power leakages can cause severe electric
shock.
• Never use gas pipes, telephone lines, or other
potential lightning attractors as an electrical ground.
- Improper use of the grounding plug can result
in a risk of electric shock.
If it is necessary to use an extension cord, use
only a 3-wire extension cord that has a 3-blade
grounding plug and a 3-slot receptacle that will
accept the plug on the appliance.
The marked rating of the extension cord should
be AC 115-120 V, 10 A, or more.
If a grounding adapter is used, make sure the
receptacle box is fully grounded.
• Plug the power plug into the wall socket firmly.
Do not use a damaged power plug, damaged
power cord, or loose wall socket.
- This may result in an electric shock or fire.
• If the power cord is damaged,
have it replaced immediately by the
manufacturer or one of its service agents.
• The wall socket must be easily accessible so
that the appliance can be quickly disconnected
from the wall socket in an emergency.
• It must be outside the area of the rear of the
appliance.
• When positioning the appliance, ensure the
power cord is not trapped or damaged.
• Do not locate multiple portable socket-outlets
or portable power supplies at the rear of the
appliance.
• Keep ventilation openings, in the appliance
enclosure or in the built-in structure, clear of
obstruction.
• Connect to potable water supply only.
• Do not store explosive substances such as
aerosol cans with a flammable propellant in this
appliance.
DA68-02976A-10.indb 4
CAUTION
INSTALLATION CAUTIONS
• Allow sufficient space around the
refrigerator and install it on a flat
surface.
- Keep the ventilation space in the appliance
enclosure or mounting structure clear of
obstructions.
• Allow the appliance to stand for 2 hours before
loading foods after installation and turning on.
• We strongly recommend you have a qualified
technician or service company install the
refrigerator.
- Failing to do so may result in an electric shock,
fire, explosion, problems with the product, or
injury.
- When installing the refrigerator, make sure both
legs contact the floor for secure installation.
Legs are located at the bottom back of each
door.
Insert a flathead screwdriver and turn it in the
direction of the arrow until it is level.
- Always balance the load on each door.
- Overload on any one door may fell the
refrigerator, causing physical injury.
WARNING
CRITICAL USAGE WARNINGS
• Do not insert the power plug into a wall
socket with wet hands.
• Do not store articles on the top of the
appliance.
- When you open or close the door, the articles
may fall and cause personal injury and/or
English - 4
2018. 7. 9.
5:13
Publicidad
