Rocket BOXER Manual De Uso Y Mantenimiento página 36

EN
2
- TRANSPORT AND
INSTALLATION
The machine installation per-
sonnel must, before proceeding,
read these instructions and, in
particular, the previous sections
regarding general information and
safety requirements. Installation
MAINTENANCE
must be carried out by specialised
personnel.
2.1 Packaging, handling and
transport
The machine is supplied completely assem-
bled (except for the accessories contained in a
special box) in a cardboard packaging placed
on a pallet. (fig. 2.1).
fig_2.1
The weigh of the unladen machine is indicated
directly on the packaging or is visible through
it, on the "CE" marking plate applied on the
machine.
The packed machine must be protected in a
sheltered and moisture-free premises until it
is installed in a suitable environment.
After the removal of the packaging, it is nec-
essary to verify that the various components
are in perfect condition and that there are no
MAINTENANCE
traces of tampering, damaged parts, etc.
36
i
MACHINE
UNDER
i
MACHINE
UNDER
BOXER
It will also be necessary to check that the
machine is complete with all its parts, any
accessories and technical documentation as
per the transport documentation.
CAUTION! Before proceeding
with the installation, in case
anomalies are found in the
checks on delivery, report the
findings to the manufacturer.
2.1.1 Pictograms on the packaging
Up
Fragile
Protect from moisture
Do not stack more than two
packages
Recyclable parts
CE marking
CAUTION! Before proceeding with
the installation, in case anomalies
are found in the checks on delivery,
report the findings to the manu-
facturer.