Publicidad
Idiomas disponibles
Idiomas disponibles
Connecting with the Mi Home/Xiaomi Home App
This product works with the Mi Home/Xiaomi Home app*. Use the Mi
Home/Xiaomi Home app to control your device, and to interact with other smart
home devices.
Scan the QR code to download and install the app. You
will be directed to the connection setup page if the app
is installed already. Or search for "Mi Home/Xiaomi
Home" in the app store to download and install it.
Open the Mi Home/Xiaomi Home app, tap "+" on the upper right, and then follow
the instructions to add your device.
* The app is referred to as Xiaomi Home app in Europe (except for Russia). The name of the app
displayed on your device should be taken as the default.
Notes:
• Only 2.4 GHz Wi-Fi networks are supported.
• The version of the app might have been updated, please follow the instructions based on the
current app version.
• When connecting the robot vacuum to the Mi Home/Xiaomi Home app using an iOS device,
follow the instructions in the app to connect to the robot vacuum's hotspot
"xiaomi-vacuum-d106gl_mibtXXXX".
Rese ing the Wi-Fi
While the robot vacuum is turned on, press and hold the bu ons
seconds. The Wi-Fi is successfully reset when you hear a voice prompt.
Rese ing the system
Press and hold the bu on
for 5 seconds until you hear a "beep", and then
press and hold the bu on
for 5 seconds again until you hear the voice prompt.
The robot vacuum then restarts, and se ings like scheduled cleaning and Wi-Fi
are restored to factory defaults.
Issue
The robot vacuum cannot
connect to Wi-Fi.
76719DE8
An iOS device cannot connect to the
hotspot
"xiaomi-vacuum-d106gl_mibtXXXX"
of the robot vacuum.
and
for 7
09
Solution
• Check whether the Wi-Fi password is
correct.
• The robot vacuum does not support
the 5 GHz network frequency band,
please connect it to a 2.4 GHz
network.
• The Wi-Fi signal is weak. Make sure
the robot vacuum is in an area with
good Wi-Fi coverage.
• There is something wrong with the
Wi-Fi connection. Reset the Wi-Fi and
download the latest version of the Mi
Home/Xiaomi Home app, then try
reconnecting.
Ensure the robot vacuum is in an area
with good Wi-Fi coverage, then reset
its Wi-Fi and reconnect it to the
network.
Publicidad
