enphase Mobile EV Charger Manual De Usuario página 6

Instructions pertaining to a risk of fire or electric shock
When using the Mobile EV Charger, basic electrical safety precautions should be followed:
• Read all instructions before using this product
• Use this EVSE to charge electric vehicles equipped with an SAE J1772 charge port unless an adapter is used.
Consult the vehicle's owner manual to determine if the vehicle is equipped with the correct charge port.
• This product contains no user-serviceable parts. Consult the
service information. Do not attempt to repair or service the EVSE yourself.
• Do not use (or immediately discontinue using) the EVSE if it appears cracked, frayed, broken or damaged,
or is defective or fails to operate. Contact Enphase Support for service immediately.
• Not for use in commercial garages where a COMMERCIAL GARAGE is defined as a facility (or portion thereof)
used for the repair of internal combustion vehicles in which the area may be classified due to flammable vapors
being present (such as from gasoline).
• Do not place fingers inside the coupler end of the SAE J1772 charge cable.
• If rain falls during charging, Do not allow rainwater to run along the length of the charge the cable such that it
causes the electrical outlet or charging port to become wet.
6 © 2024 Enphase Energy Inc. All rights reserved.
Mobile EV Charger EVSE User Manual
Enphase Support section in this manual for
February 2024
140-00265-04