enphase Mobile EV Charger Manual De Usuario página 7

Mobile EV Charger EVSE User Manual
Additional instructions for plug-in hazards
• Do Not use this EVSE with an extension cord or wall plug adapter. Plug this EVSE directly into a wall receptacle.
• Do Not use the adapter on this EVSE with an outlet that it is not designed for.
• Do Not disconnect the EVSE from the power outlet while the vehicle is charging.
• Do Not plug the EVSE into an outlet that is not properly grounded.
• Do Not plug the EVSE into an electrical outlet that is submerged in water or covered in snow. If, in this situation,
the EVSE is already plugged in and needs to be unplugged, turn off the breaker before unplugging.
• Do Not plug the Mobile connector into a damaged, loose, or worn power outlet. Ensure that the prongs on
the Mobile connector fit snugly into the wall outlet.
• It is recommended that a more robust, hospital-grade outlet be used if the EVSE is moved often.
Additional safety instructions
WARNING: This device is intended only for charging vehicles that do not require ventilation during charging.
NOTE: VENTILATION - Some electric vehicles require an external ventilation system to prevent the accumulation
of hazardous or explosive gases when charging indoors. Consult the vehicle owner's manual to determine if your
vehicle requires ventilation during indoor charging.
NOTE: Vehicles that conform to the SAE J1772 standard for communication can inform the charge station
that they require an exhaust fan. The EVSE is not equipped to control ventilation fans. Do not charge the vehicle with
the EVSE if ventilation is required.
Save these instructions for future reference.
February 2024
140-00265-04
© 2024 Enphase Energy Inc. All rights reserved.
7