Ricatech RR900 Retro XXL Manual Del Usuario página 5

TO PLAY A CD
1. Press the POWER switch and select MODE SELECTOR to CD.
2. Flip open the semi circle "CD DOOR".
3. Turn the "RESET" pointer to "OFF" position and insert a disc onto the disc tray.
**(Make sure the "RESET" pointer in "ON" position after disc loaded.)
4. Press the PLAY/PAUSE button to play the CD, press once again to temporarily stop disc play.
5. Press STOP to stop playing the CD.
6. Adjust listening level and sound effect with Volume,Treble and Bass knob
7. Press SKIP FORWARD to skip ahead to next track. Press SKIP BACKWARD to skip back to
previous track. The track number will be displayed in readout.
8. During disc play mode, press the FAST FORWARD or FAST REWIND to search a particular
point quickly.
NOTE:
If the disc is seriously scratched, or too dirty, disc play may not start.
If an improperly centered disc is played, noise can be heard in the mechanism. The use of such
discs should be avoided.
PROGRAMMED DISC PLAY
It is not possible to enter programs during disc play. Press the STOP button first, then enter a pro-
gram.
1. Press the STOP button.
2. Press the PROGRAM button. Select a track number using SKIP FORWARD or SKIP BACK-
WARD button,press PROGRAM button again
3. Repeat step 2 until all the desired tracks are programmed in memory
NOTE:
To modify the program, press the STOP button and restart from step 2.
-To clear the program, press the STOP or power is switched off
REPEAT DISC PLAY
4