Publicidad
Idiomas disponibles
Idiomas disponibles
Program Schedule
You can program four time periods each day, with different settings for
weekdays and weekends. We recommend the pre-sets (shown in the table
below), since they can reduce your heating/cooling expenses.
Wake - Set to the time you wake up and the
temperature you want during the morning, until
you leave for the day.
Away - Set to the time you leave home and the
temperature you want while you are away (usually
an energy-saving level).
Home - Set to the time you return home and the
temperature you want during the evening, until
bedtime.
Sleep - Set to the time you go to bed and the
temperature you want overnight (usually an
energy-saving level).
NOTE: To temporarily or permanently override any of the above program
schedules, see page 4.
To adjust program schedules
1
Press Menu on your thermostat.
2
If PROG is displayed, press Select. If
HOLD is displayed, press
Select. Then ON is displayed, press
Select.
3
Press
or
edit (MTWTF or SS). Press Select.
4
Press
or
period to edit (Wake, Away, Home, and
Sleep). Press Select.
5
ON is displayed. Press Select to keep the
schedule period on. Or press
Select to turn off the schedule period.
6
Time starts blinking. Press
the schedule period start time. Press Select.
7
Temperature starts blinking. Press
adjust the "Heat" setpoint temperature. Press
Select. Press
temperature setpoint. Press Select.
8
Repeat steps 4 through 7 for the remaining
schedule periods.
9
Press Home when you're finished to save and
return to the home screen.
, then press
to select the set of days to
to select a schedule
or
or
to adjust the "Cool"
(10:00 pm)
and then
to adjust
or
to
3
Heat
70
°
Wake
(6:00 am)
62
°
Away
(8:00 am)
70
°
Home
(6:00 pm)
°
62
Sleep
Cool
78
°
85
°
78
°
°
82
M39348
Publicidad
