Publicidad
Idiomas disponibles
Idiomas disponibles
Introduction
The PACE Pressure Indicator measures both pneumatic and hydraulic pressures and displays,
on a color touch-screen, the measured pressure and instrument status. The touch-screen
enables selections and settings in measuring modes. The instrument can be operated remotely
through communication interfaces.
For the full specification and user manual, refer to Druck website:
https://druck.com
Safety
The manufacturer has designed this equipment to be safe when operated using the procedures
detailed in this manual. Do not use this equipment for any other purpose than that stated, the
protection provided by the equipment may be impaired.
This publication contains operating and safety instructions that must be followed to make sure of
safe operation and to maintain the equipment in a safe condition. The safety instructions are
either warnings or cautions issued to protect the user and the equipment from injury or damage.
Use qualified technicians
and good engineering practice for all procedures in this publication.
1
Pressure
Do not apply pressures greater than the maximum working pressure to the equipment.
Maintenance
The equipment must be maintained using the procedures in this publication. Further
manufacturer's procedures should be done by an authorized service agents or the manufacturer's
service departments.
Technical Advice
For technical advice contact the manufacturer.
1. A qualified technician must have the necessary technical knowledge, documentation, special test
equipment and tools to carry out the required work on this equipment.
Copyright 2010 Baker Hughes Company.
English–PACE1000 Safety Instructions | 1
Publicidad
