Operating The Unit By Tv's Remote Control; What Is The Hdmi Control Function; Setting The Hdmi Control Function; Operate The Unit By Tv's Remote Control (Hdmi Control Function) - Yamaha YHT-S401 Manual De Instrucciones

Ocultar thumbs Ver también para YHT-S401:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Operating the unit by TV's remote control

What is the HDMI control function?

You can use the TV remote control to operate this unit if
your TV supports the HDMI control function (ex. REGZA
Link) and is connected to this unit's HDMI OUT (ARC)
jack. *1
Remote control of TV (Example)
y
*1
• Some TV supports switching the UniVolume function on/off
except the above.
• Even if your TV supports the HDMI control function, some
functions may not be available. For details, refer to the manual
supplied with your TV.
• If you use HDMI to connect this unit to a device such as a BD
player that supports HDMI control, you can control that device
using the HDMI control function.
• We suggest that you use products (TV, BD/DVD player, etc.)
from the same manufacturer.
Power on/off
Switches input
This unit automatically selects
the input according to the
input source setting on the
TV. Switching input on TV
menu (ex. selecting BD player
on TV menu) also changes
input of this unit.
Volume up/down
Selects a component to
reproduce sounds (this
unit or TV)

Setting the HDMI control function

1
Turn on all components connected to this
unit with HDMI.
2
Check all components connected with HDMI
and enable the HDMI control function on
each component.
For this unit, set "3-1:CONTROL" in the setup menu
"3:HDMI SETUP" to "ON" (☞ P. 19). *
For external components, refer to the manual
supplied with each component. *
3
Turn off the TV and then turn on it again.
y
*2
• The default setting is "OFF".
When "3-1:CONTROL" in the "3:HDMI SETUP" is set to
"ON" in setup menu,
– Even you press
(Power) button, the power does not
completely turned off and the signal outputs from the HDMI
IN jack to HDMI OUT (ARC) jack.
– Before turning off the unit, select desired input sources
connected to HDMI IN (1 to 3) jack.
– According to the TV, the TV operation such as changing the
channel may change the setting of surround modes of this
unit.
y
*3
The example of TV settings
• From a setup menu on your TV, select "Link setting" → "HDMI
control setting" (example), then set a setting such as "HDMI
control function" to "ON" (example).
• Setting such as "Speaker priority" should be set to "AV
amplifier".
(Power)
Input
selector
2
3
23
En

Hide quick links:

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Sr-301Ns-br301

Tabla de contenido