Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING – To reduce the risk of injury:
instructions and those published by the battery manufacturer and
manufacturer of any equipment you intend to use with this unit. Review
cautionary markings on these products and on engine.
INTRODUCTION
Congratulations on purchasing your new Lithium Jump-Starter
/ Power Bank. Read this Instruction Manual and follow the
instructions carefully before using this unit.
IMPORTANT NOTES:
• Several factors can affect a jump-starter's ability to boost a
vehicle's battery, including, but not limited to the size of the battery,
the temperature (hot or cold), whether the battery is damaged or
defective, and whether the jump-starter itself is fully charged.
• The jump-starter requires a minimum voltage to detect the
correct connection before it will begin to boost. If the vehicle battery
voltage is below approximately 2 volts, it may not be able to detect
connection and may not be able to start the vehicle. While this low
battery voltage is rare it may occur under extreme conditions.
FEATURES
1. Clamp Connector
2. Fault Indicator
3. Power Button for Second USB-C and USB-A
4. Power Button for LED Area Light
5. Battery Status LED Indicators
6. Cold Indicator
7. Overheat Indicator
8. Boost Indicator
9. Positive (+) Red Clamp
10. Negative (–) Black Clamp
11. Clamp Port
Follow these
12. First USB-C Port
13. Second USB-C Port
14. USB-A Port
15. USB-C to USB-C Charging Cable
16. USB-C to USB-A Charging Cable
17. LED Area Light
18. 12V DC/USB Charging Adapter
19. 12V DC/USB Charging Adapter USB Port
20. 120V AC/USB Charging Adapter
21. 120V AC/USB Charging Adapter USB Port
4
3
5
1
6
11
13
14
17
17
9
5
6
7
8
2
9
12
10
19
18
20
21
15
16
Publicidad
