ADE CK 2306 Instrucciones De Operación página 33

As soon as the batteries are inserted, the alarm
clock switches to reception, see next chapter.
Notes on changing the battery:
‚ Only use the battery type specified in
"Technical data".
‚ Always exchange all of the batteries at the
same time.
‚ Dispose of old batteries in an environmentally
friendly manner, as described in "Disposal".
Receiving the time signal
When the batteries are inserted, all displays are
shown for a brief moment and the display is
illuminated.
The measured room temperature is displayed
shortly afterwards.
The device then switches to
receiving-mode, during which the
number of radio waves indicates the
quality of the reception: The more radio
waves shown on the display, the better
is the reception.
As soon as the time signal has been received in
sufficient strength, the time is displayed.
When daylight saving time is enabled,
displayed.
CK 2306 DCF radio-controlled alarm clock
is
33