Publicidad
Idiomas disponibles
Idiomas disponibles
IMPORTANT:
Please study them and learn their meaning for critical information to operate the tool safely.
SYMBol
DeSCripTion
V
Volts
a
amperes
hz
hertz
w
watts
no load speed
kg
Kilograms
h
hours
.../min
Per minute
SPECIFIC SAFETY RULES FOR CORDLESS RECIPROCATING SAWS
WARNING:
familiarity with product (gained from repeated use)
replace strict adherence to product safety rules. if you
use this tool unsafely or incorrectly, you can suffer
serious personal injury!
WARNING:
gripping surfaces when performing an operation where
cutting tools may contact hidden wiring or its own cord.
Contact with a "live" wire will make exposed metal
parts of the tool "live" and shock the operator!
• Be aware that this tool is always in an
operating condition, because it does not have to
be plugged into an electric outlet.
• When operating the tool from an elevated
position, be aware of people or things beneath you.
• Check your work area for proper clearances
before cutting to avoid cutting into your workbench, the
floor, and other potential obstacles.
• Hold the saw firmly with both hands for all
cutting operations. During the cutting, the blade may
suddenly bind in the workpiece and may cause the saw
to kickback towards the operator.
• Keep hands away from moving parts. never
place your hands near the cutting area.
• Avoid prolonged operation of this tool, as
continuous vibration may lead to lasting injuries in your
SYMBOLS
some of the following symbols may be used on your product and appear throughout the manual.
SYMBol
DeSCripTion
revolutions per
rPM
minute
strokes per
sPM
minute
oscillations per
oPM
minute
alternating
current
or a.C.
Direct current
or D.C.
Do not use in
wet conditions
battery cannot
exceed 59 °C
Do not put
battery in fire
Do not let comfort or
hold the tool by insulated
SYMBol
warning symbol. Precautions that involve
your safety
to reduce the risk of injury, read operator's
Manual before using this product
wear safety glasses, ear protection and
respiratory protection
Do not dispose with household waste
Do not touch the running blade
Class ii Double insulated construction
this symbol designates that this product is
listed with u.s. and Canada requirements
by etl testing laboratories, inc.
fingers, hands, and arms. to enhance protection, wear
gloves for additional cushioning, take regular breaks,
and restrict daily usage time.
• Do not cut oversized workpieces.
• Do not cut nails or screws unless you are using
a blade specifically designed for this purpose. inspect
your material before cutting.
• Before you begin cutting, especially during
demolition, check for potential hazards such
as water, power, and communications lines.
• Before switching on the tool, be sure the
blade is not contacting the workpiece.
• Always allow the blade to completely stop
before removing from the workpiece. Do not touch the
blade, it is hot and may cause a serious burn.
• Wear eye and hearing protection. always
use safety glasses with side shields. unless otherwise
specified, everyday glasses provide only limited impact
resistance, they are not safety glasses. use only certified
safety equipment; eye protection equipment should
comply with ansi z87.1 standards. Protective hearing
equipment should comply with ansi s3.19 standards.
• Protect your lungs. wear a face or dust mask if
the operation is dusty. following this rule will reduce the
risk of personal injury.
• Always disconnect the battery pack from
the tool or place the switch in the locked or off
position before any assembly, adjustments or changing
ENGLISH
DeSCripTion
5
Publicidad
