LaserLiner StarFinder Plus Manual Del Usuario página 12

Safety instructions
– The device must only be used in accordance with its intended
purpose and within the scope of the specifications.
– The structure of the device must not be modified in any way.
– Do not work alone in the vicinity of hazardous electrical
installations and only under the guidance of a qualified
electrician.
– Do not expose the device to mechanical stress, extreme
temperatures, moisture or significant vibration.
– Switch off the device before removing the battery.
– The device must no longer be used if one or more of its
functions fail, the battery charge is weak, or the housing
has been damaged.
– Take particular care when the AC warning is displayed
(corresponds to voltages > 50 Vrms)
– Attention: The voltage warning display may become
unreliable due to shielded cables or insulation, and dangerous
voltage may be present even if it is not displayed as such.
– The measuring device must not be used as a substitute for
a two-pole zero potential test.
Additional information on use
Observe the technical safety regulations for working on
electrical systems, especially: 1. Safely isolating from power
supply, 2. Securing to prevent system being switched on
again, 3. Checking zero potential, two-pole, 4. Earthing
and short-circuiting, 5. Securing and covering adjacent
live components.
Safety instructions
Dealing with electromagnetic radiation
– The measuring device complies with electromagnetic
compatibility regulations and limit values in accordance
with EMC-Directive 2014/30/EU.
– Local operating restrictions – for example, in hospitals, aircraft,
petrol stations or in the vicinity of people with pacemakers –
may apply. Electronic devices can potentially cause hazards
or interference or be subject to hazards or interference.
– The measuring accuracy may be affected when working close
to high voltages or high electromagnetic alternating fields.
– Precautions: Do not use any other StarFinder Plus within a
distance of 5 m. Do not use any electronic transmitters
or electric motors in the vicinity.
12
EN