Publicidad
Idiomas disponibles
Idiomas disponibles
Front panel LED indications
The front panel on the IQ EV Charger
has four indicator lights, as shown in
Figure 1.
POWER (amber) indicates that
power is available to the EVSE.
CHARGING (green) indicates that the
vehicle is requesting a charge, and AC
power is currently applied to the vehicle.
POWER FAULT (red) indicates that
the EVSE is not wired correctly. The
problem can be improper grounding or a
missing earth ground. A qualified electri-
cian should examine the wiring.
CHARGING FAULT (red) indicates
that the EVSE cannot communicate with
the vehicle correctly or that the unit has
detected a safety fault condition.
Table 1: Front panel LED information
Amber
#
power
LED
1
OFF
2
ON
3
ON
4
ON
5
ON
6
ON
7
ON
Green
Red
charging
power
charging
LED
Fault LED
Fault LED
OFF
OFF
OFF
OFF
ON
OFF
ON - not
OFF
blinking
ON - not
OFF
OFF
blinking
OFF
OFF
Blinking
OFF
Blinking
Blinking
11
IQ EV Charger User Manual
Figure 1: Front panel
Red
Fault condition
No power to EVSE. Check
OFF
the circuit breaker.
Not plugged into the EV or the
OFF
EV is not ready to charge.
Charging enabled, power is
OFF
applied to the vehicle.
Improper grounding or ground is
OFF
not present.
Problem with EV communications.
Disconnect and restart.
EV ground fault trip. Check
vehicle connection.
Internal EVSE fault.
Call for service.
Publicidad
