Publicidad
Idiomas disponibles
Idiomas disponibles
IQ EV Charger User Manual
Receptacle safety instructions for 240 V plug-type EVSE
An EV Supply Equipment (EVSE) draws more power than any average
home load. For Plug-type EVSE units, the provided 14-50R or 6-50R
receptacle shall be installed by a qualified electrician per local codes
and standards and in accordance with the manufacturer's instructions.
If you require an additional or replacement receptacle, please contact
Enphase Support for assistance.
NOTE: Installation of the receptacle shall be in accordance
with local codes and the instructions provided with the
receptacle by a qualified electrician.
WARNING: Improper installation of the receptacle may have
an increased risk of overheating and may lead to fire hazards.
Figure 8: NEMA 6-50R
It is also highly recommended that a qualified electrician inspects the
premise wire connections on the back of a pre-existing NEMA out-
let before using it. Wire connection points behind the receptacle may
become loose or oxidized if installed many years ago and may cause
the outlet to fail. Ensure the receptacles are free of physical damage or
defects before installing the EVSE.
If you believe the provided receptacle to be defective, please contact
our Enphase Support at (877) 797-4743.
Figure 9: NEMA 14-50R
22
Publicidad
