Descargar Imprimir esta página

Be Cool BC2TAC2401 Instrucciones De Uso página 177

Torre de refrigeración digital

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 66
On/Off button:
Press the button to switch the unit on or off.
Speed level:
There are 12 different speed levels, the display shows: 01 - 12. When the display
stops flashing, the setting is accepted.
Timer button:
Use the key to switch off the unit on a timed basis. Each time you press the
button, the operating time is gradually extended by one hour (1st to 12th hours).
To switch the unit off automatically, please proceed as follows: While the air
cooler is in operation, press the button repeatedly until the desired hour duration
lights up. The setting is accepted when the desired hour duration stops flashing.
Cooling function:
Use the button to start the cooling function.
Make sure that the water level indicator is above the MIN level.
As soon as the button is pressed, the unit starts pumping water against
the water filter to create cold, moist air, which is then blown out of the
unit.
Pivot function:
Use the key to activate the swivel function of the unit. The display on the
control bar lights up.
Press the button again to deactivate the function.
NOTE: This function enables horizontal air distribution in the room by moving the
discharged air to the left and right.
Lighting:
Use the button to switch on the decorative lighting.
Anion key:
Use the anion key to activate the anion function.
177

Publicidad

loading