Num'axes EDUCATION CANICALM ULTRA Manual De Instrucciones página 12

The table below shows how the collar operates in each mode:
Number of beep sounds heard
when switching mode
____________________________________________________________________
Setting the bark detection sensitivity
Setting the barking detection sensitivity is a very important preliminary operation.
This setting ensures detection of any barking and helps avoid unnecessary triggering.
The detection must therefore be sufficiently but not overly sensitive.
In the factory, detection sensitivity is set at the medium position (medium sensitivity).
To adapt the detection sensitivity to the barking strength of your dog, proceed as
follows:
‒ Remove the 4 screws from the battery cover.
‒ Remove the battery cover.
‒ Carefully turn the setting screw according to the sensitivity you require (See.
Diagram below).
CAUTION: the adjustment system has a stop for both the minimum and
maximum sensitivity. Turn delicately with the supplied screwdriver, without
forcing.
‒ Replace the battery cover and retighten moderately the 4 screws.
MAXIMUM
sensitivity
Guide d'utilisation CANICALM ULTRA- NUM'AXES Education – Avril 2024 – ind. A - 12/48
1
2
3
4
MEDIUM sensitivity
Mode
1 Beep sounds only
Beep sounds +
2
light stimulations
Beep sounds +
3
strong stimulations
Beep sounds +
4
progressive stimulations
Operation
MINIMUM
sensitivity