Changing The Auto Mode Setting; Changing The Fan Speed - Philips AC2889 Manual Del Usuario

2
Touch to switch on the air purifier
(fig. j).
» The air purifier beeps.
» The air purifier operates under
the Pollution mode by default.
» When the air purifier is warming
up, " " displays on the
screen. After measuring the
particulate matter only in the
air, the air purifier shows the
PM2.5 level and operates in the
auto mode with
the screen (fig. k).
» After measuring the air
quality for approximately
30 seconds, the air quality
sensor automatically selects the
appropriate air quality light color.
3
Touch and hold
switch off the air purifier.
Note
• If the air purifier stays connected
to the electrical outlet after turning
OFF, the air purifier will operate
under the previous settings when
turned ON again.
Changing the Auto mode
setting
You can choose the Pollution mode
( ), the Allergen mode (
Bacteria & Virus mode (
Pollution mode
The specially designed pollution
mode can effectively remove airborne
pollutants such as PM2.5.
•
Touch the Auto mode button
select the Pollution mode (fig. l).
» Auto (A) and
screen.
8 EN
displayed on
for 3 seconds to
), or the
).
to
display on the
Allergen mode
The extra-sensitive allergen mode
is designed to react to even a small
change in allergen levels in the
surrounding air.
•
Touch the Auto mode button
select the Allergen mode (fig. m).
» Auto (A) and
screen.
Bacteria & Virus mode
The bacteria & virus mode boosts the
airflow to quickly reduce bacteria &
viruses.
•
Touch the Auto mode button
select the Bacteria & Virus mode
(fig. n).
» Auto (A) and
screen.

Changing the fan speed

In addition to the Auto modes, there are
several fan speeds available.
When using the manual fan speed
settings, the purifier will still monitor the
air quality, but it will not automatically
adjust the fan speed if it detects
changes in the air quality.
Sleep (SL)
In sleep mode, the air purifier operates
quietly on a very low speed.
•
Touch the fan speed button
select the sleep mode (
Note
• All the lights will go off in sleep
mode.
• You can turn on the lights manually
by touching .
to
display on the
to
display on the
to
) (fig. o).