Getting Started; Installing The Filters; Setting Up The Wi-Fi Connection For The First Time - Philips AC2889 Manual Del Usuario

3 Getting started

Installing the filters

Note
• Make sure the air purifier is
unplugged from the electrical outlet
before installing the filters.
• Make sure the side of the filter with
the tag is pointing towards you.
1
Pull the bottom part of the front
panel to remove it from the air
purifier (fig. c).
2
Press the two clips down (1) and pull
the pre-filter towards you (2) (fig. d).
3
Remove all filters (fig. e).
4
Remove all packaging materials
from the filters (fig. f).
5
Place the thick filter (FY2422) into
the air purifier and then the thin AC
filter (FY2420) (fig. g). The model
numbers are shown on each filter.
6
Attach the pre-filter back into the
air purifier (fig. h).
Note
• Make sure the side with the two
clips is pointing towards you, and
that all hooks of the pre-filter are
properly attached to the purifier.
7
Reattach the front panel by pressing
the top part of the panel onto the
top of the air purifier (1). Then, gently
push the panel against the body of
the air purifier (2) (fig. i).
8
Wash your hands thoroughly after
installing filters.
6 EN
Setting up the Wi-Fi
connection for the first
time
Setting up the Wi-Fi connection
for the first time
1
Download and install the Philips
"Clean Home+" app from the
App Store or Google Play.
2
Put the plug of the air purifier in the
power socket and touch
on the air purifier.
» The Wi-Fi indicator
orange
for the first time.
3
Make sure that your smartphone or
tablet is successfully connected to
your Wi-Fi network.
4
Launch the "Clean Home+" app and
click on "Connect a New Device"
or press the "+" button on the top
of the screen. Follow the onscreen
instructions to connect the air
purifier to your network.
5
After the successful pairing and
connection, the Wi-Fi indicator
will light up white. If pairing
is not successful, consult the
troubleshooting section, or the
help section in the "Clean Home+"
app for extensive and up-to-date
troubleshooting tips.
to turn
blinks