Filter Reset; Storage - Philips AC2889 Manual Del Usuario

Filter reset

You can replace filters even if there is no
filter replacement code displayed on the
screen. After replacing a filter, you need to
reset the filter lifetime counter manually.
1
Touch and
for 3 seconds to enter the filter reset
mode (fig. ~).
» Code (A3) of the NanoProtect filter
Series 3 displays on the screen.
2
Touch and hold
force reset the filter lifetime counter
of the NanoProtect filter Series 3
(fig. }).
3
Code (C7) of the Nanoprotect filter
active carbon displays on the
screen after the lifetime counter of
the NanoProtect filter Series 3 has
been reset (fig. ).
4
Touch and hold
force reset the filter lifetime counter
of the Nanoprotect filter active
carbon and exit the filter reset
mode (fig. €).
simultaneously
for 3 seconds to
for 3 seconds to
7

Storage

1
Turn off the air purifier and unplug
from the wall outlet.
2
Clean the air purifier, air quality
sensor and pre-filter (see chapter
'Cleaning').
3
Let all parts air dry thoroughly
before storing.
4
Wrap the filters and pre-filter
separately in air tight plastic bags.
5
Store the air purifier, filters and pre-
filter in a cool, dry location.
6
Always thoroughly wash hands after
handling filters.
EN 13