Toro 140-8374 Instrucciones De Instalación página 4

2
Installing the Striping Kit
Parts needed for this procedure:
1 Striping bracket
2 Washer-head screw (5/16 x 1/2 inch, self-threading)
2 Flat washer (5/16 inch)
1 Wiper
4 Hex-head screw (1/4 x 3/4 inch)
4 Washer
4 Speed nut
Installing the Striping Bracket
1. Using the striping bracket as the template, drill 2 holes (9/32 inch) into the mower deck using the
dimensions shown in
1. 62 mm (2-7/16 inches)
2. 133 mm (5-1/4 inches)
Figure 1.
Figure 1
3. 316 mm (12-7/16 inches)
2
g338345