DELTA DORE TYDOM 3.0 Manual De Instrucciones página 11

2. Installation
2.1 Connections
2.1.1 Prerequisites
You will need a computer network with an
Internet connection that includes a router with
activated DHCP function, which is the case
for all ADSL units supplied by Internet service
providers.
2.1.2 Connections
1
Connect the power unit plug to the server.
2
Connect the power lead to the server's
network socket(at the back) and to your
computer network on the other side.
3
Connect the X3D USB key
4
Connect to a power outlet.
5
Press the key
We recommend that you keep TYDOM 3.0 away
from any equipment which could potentially
transmit or receive a radio signal.
Note: To switch off the server, press
before disconnecting the power lead.
.
once and wait for the indicator light to go out
11
1
2
5
EN
4
3