Publicidad
Idiomas disponibles
Idiomas disponibles
EN INSTRUCTIONS ON ASSEMBLY AND USE
CONGRATULATIONS ON
PURCHASING THIS PRODUCT!
Please read these instructions carefully. The instructions are an in-
tegral component of the product. Therefore, please store them and
the packaging carefully in case questions arise in the future. Please
always include these instructions when handing on the product to
a third party. This product must be assembled by an adult. This
product is designed for private / domestic use only. This product is
not designed for commercial / industrial use. The use of the product
requires certain capabilities and skills. Always adjust according to
the age of the user and use for the purpose it has been designed for.
TECHNICAL SPECIFICATIONS
Item:
Children's helmet Beary
Item number: 84910, 84920
Size:
84910 for head circumference from 44 up to 47 cm |
84920 for head circumference from 48 up to 52 cm
Weight:
250 g (84910) | 280 g (84920)
Purpose:
Helmet for use when riding a bicycle, pedal-scoot-
er riding, Inline skating, roller skating and skate-
boarding, in order to protect against the conse-
quences of an accident. This helmet has passed
EN1078:2012+A1:2012 to show conformity to the
respectively Regulation EU 2016/425.
CONTENTS
1 x Helmet | 1 x These instructions
SAFETY INSTRUCTIONS
• WARNING! This helmet should not be used by children while
climbing or doing other activities when there is a risk of strangu-
lation / hanging if the child gets trapped with the helmet.
• WARNING! This helmet is designed and intended exclusively for
the use of pedal cyclists and for skateboarders and roller skaters.
It is not intended for and will not provide adequate safety protec-
tion if used during motorsport or moped use.
• The wearer must have the helmet put on and adjusted by an adult.
• This helmet was developed to absorb a portion of the energy of
a fall.
• No helmet is able to protect fully against unforeseen injuries! A
helmet can only prevent severe injury to the head during a fall.
Wearing other protective equipment like arm, knee and elbow pro-
tection is recommended. Be extremely careful with sports that in-
volve riding an object with wheels. Even accidents at slow speeds
may lead to serious injuries.
• The helmet can fully protect only when it fits correctly. On the
inside of the helmet, you will find a tag with the tested size catego-
ries. It is advisable to test different sized helmets for comparison.
The choice should fall on a helmet that fits tightly and at the same
time comfortably. The helmet should not move when in motion.
Do not use the helmet, if it cannot be adjusted optimally. In this
case a different size or model should be chosen.
• Don't wear a scarf, high hair etc. under the helmet. Danger of
injury!
• When wearing the helmet, the chin strap should be closed!
• Check the helmet before every ride for visible damage or wear,
and tight fit, even if there is no visible damage from the outside,
the helmet should be replaced and destroyed after every hard
stroke or deep scratches. The helmet must at latest be replaced 7
years after the date of production, since an old or damaged helmet
can no longer provide effective protection against injuries.
• Please do not alter or remove any parts of the helmet. It could lead
to dangerous consequences.
• The effect of coatings (paint), adhesives, detergents, chemicals
and solvents, severely damage the protective effect of the helmet.
Clean the helmet with lukewarm water.
• The product should not be stored behind glass panes, e.g. in the
car (fuel-glass effect) or near heating or warming sources. Uneven
helmet surfaces and bubble formation are signs of thermal dam-
age and render the helmet unusable.
USAGE INSTRUCTIONS
HOW SHOULD THE HELMET FIT (fig. 1)?
To ensure that the helmet fits correctly, it needs to be adapted to its
wearer. The helmet should clasp around the head well and should
be worn level. The front edge of the helmet should rest one to two
fingers wide above the nasal root so that the forehead remains
protected, but it does not hang too deep in the face and the sight is
not impaired. Whether the helmet is fastened securely can be tested
by shaking the head lightly with the chin straps open.
HOW DO I CORRECTLY ADJUST THE HELMET (fig. 1 – 4)?
The integrated adjustment system can be continuously adjusted. In
order to reduce the helmet width, turn the rotary knob A to the right.
In order to increase it, turn the rotary knob A to the left. The helmet
must sit firmly and horizontally on the head. In order to check for
the proper tension, the helmet must be put on and the safety lock B
closed. The strap divider E should sit below the ears, the strap should
not cover the ears. When the mouth is open, the chin strap C should
press against the chin. After adjusting the straps, the protruding
strap ends can be secured with the retaining ring D and covered with
the chin guard.
MAINTENANCE AND STORAGE
Use a dry or damp cloth only to clean the product; do not use special
cleaning agents! Check the product for damage or traces of wear and
tear before and after each use. Do not make any structural changes.
For your own safety, please use original spare parts only. These can
be sourced from HUDORA. If parts become damaged or if sharp
edges or corners should develop, the product may not be used any
more. If in any doubt, please contact our service team (http://www.
hudora.de/). Store the product in a safe place where it is protected
from the elements, cannot be damaged, and cannot injure anyone.
DISPOSAL ADVICE
At the end of the product's life, please dispose of it at an appropri-
ate collection point provided in your area. Local waste management
companies will be able to answer your questions on this.
SERVICE
We make every effort to deliver faultless products. If faults do arise
however, we put just as much effort into rectifying them. You can find
numerous information on the product, replacement parts, solutions
to problems and lost assembly manuals at http://www.hudora.de/.
All images are examples of the design.
4/12
Publicidad
