Care And Cleaning - Zanussi ZSF2430 Manual De Instrucciones

Cancelling a delay start:
1. Press and hold the start/cancel button for approxi-
mately 5 seconds.
– The start/cancel indicator light and delay start in-
dicator light go off.
– The phase indicator lights start to flash.
2. Press the start/cancel button to start the washing pro-
gramme.

Care and cleaning

Warning! Switch the appliance off before you clean
the filters.
Cleaning the filters
Important! Do not use the appliance without the filters.
Make sure that the installation of the filters is correct.
Incorrect installation will cause unsatisfactory washing
results and damage to the appliance.
1
2
1
3
10
A
B
2
Remove the filters A and B
from the bottom of the ap-
pliance.
4
Fully clean the filters be-
low running water.
End of the washing programme
Switch off the appliance in these conditions:
• The appliance stops automatically.
• The end indicator light comes on.
For better drying results, keep the door ajar for some mi-
nutes before you remove the dishes.
Let the dishes cool down before you remove them from
the appliance. Hot dishes are easily damaged.
1
2
5
Put the filters back. Turn
the microfilter clockwise
to lock it.
Cleaning the spray arm
Regularly examine the spray arm. Remove remaining food
from the holes in the spray arm.
Do these steps to remove and to put the spray arm back:
1 2