OPERATING AND MAINTENANCE MANUAL
SOLAR PUMPING KIT
1. INDICATOR LIGHT INSTRUCTIONS
LEGEND
SYS
System power
Pump
Pump running
MPPT
Maximum power point tracking
ERR_I
Error indication
LOW POWER
Voltage failure
Tank_F
Alamara reservoir water level
WELL_L
Alamar well water level
NOTES:
•
If the "MPPT" and "PUMP" indicators flash at the same time, it means that the system is in bat-
tery mode
•
If the "LOW POWER" indicator flashes in battery mode, it means that the battery is overcharged.
www.proindecsa.com / proindecsa@proindecsa.com
DEFINITION
In solar mode: green light, the indicator is perma-
nently on.
In battery mode: Green light, the indicator flashes.
Green light, the indicator lights up with the pump
running.
Green light, monitors the input power from the solar
panels and adjusts the voltage and current to achieve
maximum pump efficiency.
Overload indicator: Red light, light on permanently.
Overcurrent indicator: Red light, flashing light.
Yellow light, the light on indicates that the system
voltage is too low with low power.
Green light, the tank is full.
Green light, the well is empty.
If the light flashes, it is in delay mode.
17
INSTRUCTION