TaoTronics TT-CL012 Guia Del Usuario página 10

EN
Degree of protection
against harmful ingress of
water or particulate matter
Safety degree of using in
flammable anesthetic gas
blending with air, oxygen
or nitrous oxide
Continuous or Non-contin-
uous operation
Classification of sterilizati-
on methods
09
IP22
Non-AP/APG
Continuous
No need for sterilization
PREPARING FOR USE
3
Connect to a power source with the included power adapter.
USING YOUR SAD LIGHT
Power On / Off
1. Press the Button Control or tap the Touch Control to turn on the lamp.
2. Press and hold the Button Control or tap and hold the Touch Control to turn off
Note:
If power is not disconnected, the lamp will remember the light brightness of last
use when turned on again.
Adjust the Light Brightness
When the lamp is on, press the Button Control or tap the Touch Control to cycle
through 25% / 60% / 100% light brightness settings.
EN
10