Shark FA220 Serie Guia Del Usuario página 5

B. POLE
A. FAN HEAD
(2 CONNECTED PCS)
C. CHARGER
1 A 2
B
1. Align and insert the 2. Align the yellow dot
Upper Pole into the
Lower Pole until it clicks
into place.
1-5
Strong Breeze Mode
Fan Speeds
Gentle Breeze Mode
Oscillation Settings
Timer
MAXIMUM CORDLESS RUNTIME: Up to 24 hours on fan speed 1.
Runtime without
MAXIMUM CORDLESS PERFORMANCE: Up to 2 hours on fan speed 5.
oscillation
PLUGGED IN: Indefinite runtime; fan will charge while operating.
Charge Time FROM 0% TO FULLY 100% BATTERY: 5 hours
Battery Indicator
Shark® FLEXBREEZE Fan Instructions
WHAT'S INCLUDED
D. BASE
SETTING UP YOUR FAN
3
3. Insert the BOLT in the
bottom of the BASE
on the assembled pole
and twist the HEX KEY
with the yellow dot on
the BASE, slide the pole clockwise to fasten it to
down onto the base. the assembled pole.
HOW TO USE YOUR FAN
Press
indicate the fan speed level.
(REMOTE ONLY) Press and hold
(REMOTE ONLY) Press and hold
1 - 45° angle 2 - 90° angle
(REMOTE ONLY) Press the
Setting 1 : 1 Hour
Setting 2 : 2 Hours
Setting 3 : 3 Hours
Setting 4 : 4 Hours
Setting 5 : 5 Hours
100% charged: white light
51%-99%: green light
21%-50%: amber light
6%-20%: red light steady
5% and below: red light blinking
E. BOLT
F. HEX KEY
4
4. CAUTION: finger pinch
risk. Insert the fan post
into the top of the
ASSEMBLED POLE
until it clicks into place.
to switch between fan speeds 1-5. LED lights will appear to
for 3 seconds for strong breeze mode.
3 - 180° angle
on the remote to move the fan head to the left or right.
(REMOTE ONLY) Press
settings 1-5 hours. LED lights will appear to indicate
how many hours the timer is set for.
LEDs will switch off after 20 seconds. To check how long is
left on your timer, press
TIP: The fan works while
charging
G. REMOTE H. COVER
5
5. Charge fan to 100%
battery before use
without the cord. FIRST
USE: before using remote
control, press POWER
BUTTON on fan.
for 3 seconds for gentle breeze mode.
Press to toggle between
oscillation angles.
LED lights will indicate which
angle is selected.
to switch between timer
and the LED lights will appear.
I. MISTING
ACCESSORY
5