Publicidad
Idiomas disponibles
Idiomas disponibles
• When the fan is unplugged and drawing power from the battery, the remote will enter OFF mode after 24 hours
of no use to preserve battery life. When in OFF mode, the remote cannot be used to power on the fan. The fan will
have to be powered on using the buttons on the top of the fan head.
• The fan head LEDs will only remain illuminated for 20 seconds after a setting adjustment is made, before turning
off to save battery.
• For information on how to activate or deactivate LOCK MODE for fan maintenance, please see the 'maintenance'
section of this manual.
• Remote may be less effective when used outside.
Shark® FLEXBREEZE Fan Instructions
SETTING ADJUSTMENT
POWER ON/OFF
To turn the fan on or off, press the POWER button on REMOTE or USER INTERFACE on the
fan head.
SETTINGS
ON
(LEDs from will turn on from left to right, then turn off from right to left)
OFF
FAN SPEEDS
Changing the FAN SPEED will increase or decrease the airflow of the fan. There are 5 fan
speed settings, plus two more modes called Strong Breeze Mode and Gentle Breeze Mode.
To increase/decrease the fan speed, press the up/down arrow on the REMOTE. To do so on
the fan head USER INTERFACE, press the fan icon to cycle through the various fan speeds.
SPEED
1
2
3
4
5
DISPLAY
LED animation will play once
LEDs will turn off
DISPLAY
Quietest operation
Moderate cooling
Balance of noise level and fan power
Air circulation
Highest power cooling
BEST FOR
8
Publicidad
