Publicidad
Idiomas disponibles
Idiomas disponibles
Batteries and Charging
WARNINGS:
Do not use any third-party battery, power cord, or charging dock. The robot vacuum can only be used with
•
the model CDZ2101 charging dock.
No action needed from users to shift the charging dock between 50 Hz and 60 Hz, and the product can
•
adapt itself for both 50 Hz and 60 Hz.
Do not dismantle, repair, or modify the battery or charging dock on your own.
•
Do not place the charging dock near a heat source.
•
Do not use a wet cloth or wet hands to wipe or clean the dock's charging contacts.
•
If the robot vacuum will not be used for an extended period, fully charge it, then turn it off and store in a
•
cool, dry place. Recharge the robot vacuum at least once every 3 months to avoid over-discharging the
battery.
The lithium-ion battery pack contains substances that are hazardous to the environment. Before
•
disposing of the robot vacuum, please first remove the battery pack, then discard, or recycle it in
accordance with local laws and regulations of the country or region it is used in.
When removing the batteries from the product, it is better to use up the batteries and make sure your
•
product is disconnected from power.
1). Uninstall the screw on the bottom, then remove the cover.
2). Unplug the battery connector, then remove the batteries. Do not damage the battery case to avoid any
3
Publicidad
