Descargar Imprimir esta página

Skymsen AMP-400 Manual De Instrucciones página 2

Abridora de masa de pizza
Ocultar thumbs Ver también para AMP-400:

Publicidad

Idiomas disponibles

Idiomas disponibles

SUMARY
1. INTRODUCTION ............................ 2
1.1 Safety .................................................... 2
2. COMPONENTS AND TECHNICAL
CHARACTERISTICS ............................ 3
3. INSTALLATION AND PRE-OPERATION
......................................................... 4
3.1 Positioning ............................................. 4
3.2 Electrical Installation .............................. 4
4. OPERATION................................... 5
4.1 Starting .................................................. 5
4.2 Operational Procedures ......................... 5
5. CLEANING ..................................... 5
6. MAINTENANCE ............................. 5
7. PROBLEM SOLVING ....................... 6
8. ELECTRICAL DIAGRAM .................. 7
1. INTRODUCTION
1.1 Safety
When incorrectly used, this equipment is a potentially
DANGEROUS machine. Cleaning, maintenance and any other
service on the machine must be made by properly trained
personnel, and the machine must be always disconnected
from the electric network.
The instructions below must always be followed in order to
avoid accidents:
1.1.1
Read this instructions
1.1.2
To prevent from the risk of an electric shock and
damage to the equipment, never use it with wet clothing
and feet on a wet or humid surface.
Never dip it in water or any other liquid. Do not spray water
directly upon the equipment.
1.1.3
The use of any equipment must be always
supervised, especially when it is used near children.
1.1.4
Disconnect the machine from the socket when: It is
not in use, It is necessary to insert or remove any parts, It is
necessary to insert or remove accessories, when cleaning,
2
repairing or servicing the equipment.
1.1.5
Never use any equipment with damaged cords or/
and plugs. Do not place the electric cord on table/counter
edges or upon hot surfaces.
1.1.6
If your equipment is not working properly, or when
it suffers any impact during a drop or has been damaged
somehow, contact Technical Assistance for maintenance.
1.1.7
The use of accessories not recommended by the
manufacturer may cause physical injuries.
1.1.8
When the equipment is turned on, keep hands and
any tools away from its moving parts. This will prevent from
physical injuries and damages to the machine.
1.1.9
During operation, never use clothes with wide
sleeves specially at the wrist.
1.1.10 When making the electric connection of the
equipment, be sure the equipment voltage is the same as
the network electric voltage.. Provide a correct grounding in
accordance to your local safety standards.
1.1.11 Never operate the equipment if the front door is
removed.
Make sure the electric cord is in perfect usage
conditions. In case it is not, have it replaced by another
that complies with the technical and safety specifications.
This replacement must be carried out by qualified
personnel and must attend the local safety standards.
This equipment must not be used by children or
any persons with reduced physical or mental aptness,
lack of experience or knowledge, unless they are under
supervision or have received from the person responsible
for safety, proper instructions on how to use the
equipment.
Children shall be watched in order to avoid them to
play with the equipment.
In case of emergency take off the plug from its socket.
Never spray water directly on to the equipment.

Publicidad

loading

Productos relacionados para Skymsen AMP-400

Este manual también es adecuado para:

Amp-500