sunjoe 24V-TB-CT Manual Del Operador página 10

m
WARNING!
To prevent serious personal injury,
make sure the switch is in the OFF (0) position, the battery is
removed and the impeller has come to a complete stop before
attaching or detaching the tubes.
Attaching the Jet Blower Tube
1. Align the notches on the cordless turbine jet blower body
with the notches on the upper blower tube and slide together
until they click into place. Repeat with the upper tube and
the lower tube, making sure they click into place (Fig. 4).
Fig. 4
Cordless
turbine jet
blower body
Notches
m
WARNING!
To avoid the risk of injury, it is not
recommended to disassemble the blower tube.
Operation
TOOL ONLY
BATTERY + CHARGER SOLD SEPARATELY
In order to operate this cordless jet blower you will need an
24V* IONMAX™ System battery and charger. See page 13
for battery and charger options and specifications, or for
more information visit shopjoe.com.
Starting + Stopping
m
CAUTION!
Starting, stopping, and restarting a DC motor
repeatedly within a few seconds can generate a great deal of
heat and damage the motor. To protect the life of your cordless
turbine jet blower, always wait at least five seconds after
stopping before restarting the jet blower.
1. Insert the battery into the battery compartment until it clicks
to lock it into position (Fig. 5).
2. To start the cordless turbine jet blower, slide the ON/OFF
Upper
blower
tube
Lower
blower
tube
3. To turn the tool off, slide the ON/OFF switch to OFF (0)
10
Fig. 5
switch to ON (I) (Fig. 6).
Fig. 6
I (ON)
(Fig. 7).
Fig. 7
Battery
pack
Battery
compartment
ON/OFF switch